AC Speed Control Motors MSD Series

MSD425-412U

Questo prodotto non è più disponibile per la vendita.

Classificazione prodotto	Nome del prodotto	Prezzo di listino	Data di spedizione
Motor / Control Circuit	MSD425-412U	-	Prodotto fuori produzione (31.3.2026 fuori produzione)

• Gearhead is required separately.

Motor and Driver Package: Motor, Control Circuit, Capacitor, Connection Socket, Operating Manual

Specifiche

Item	DSP501M□, DSP501H□	DSP502M□, DSP502H□
Power Supply Input	Single-Phase 100 VAC±10% 50/60 Hz	Single-Phase 200 VAC±10% 50/60 Hz
Applicable Motor Output Power	M: 6 W, 15 W, 25 W, 40 W Type H: 60 W, 90 W Type
Functions	Speed control, no-contact instantaneous stop, no-contact bidirectional rotation, no-contact rotation speed switching, Slow-Up/Deceleratio, rotation speed display (7-segment LED), rotation stop at abnormal condition
Control Power Supply	24 VDC±10 %, min. 0.1 A
Control Input	Signal Input: CW/CCW/SPEED SELECT Photocoupler input External contact capacity 26.4 VDC 15 mA
Variable Speed Range	50 Hz: 90~1400 r/min 60 Hz: 90~1700 r/min (6 W only 90~1600 r/min)
Speed Setting Methods	Digital Setting (Speed can be set in units of 10 r/min)

Item		Motor	Speed Controller
Insulation Resistance		After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.	After rated operation at normal ambient temperature and humidity, the measurement value between the power supply input terminal and the signal input terminal is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength		No abnormality is observed even with an application of 1.5 kVAC at 50 Hz between the coils and the case for 1 minute after rated operation at normal ambient temperature and humidity.	No abnormality is observed even with an application of 1.5 kVAC at 50 Hz or 60 Hz between the power supply input terminal and the signal input terminal for 1 minute after rated operation at normal ambient temperature and humidity.
Temperature Rise		After no-load rated operation at normal ambient temperature and humidity, the motor surface temperature rise measured by the thermometer method is 60 °C max. (50 °C max. for MSD560 Type, 45°C max. for MSD590 Type).	-
Overheat Protective Device		Built-in Thermal Protector (Automatic Return Type) Open: 120±5℃ Reset: 77±15℃ (MSD560, MSD590 Type only)	-
Operating Environment	Ambient Temperature	-10~+50°C (Non-freezing)	0∼+40°C (Non-freezing)
Operating Environment	Ambient Humidity	85 % max. (Non-condensing)
Thermal Class		120(E)	-

Note

Do not perform an insulation resistance measurement or a dielectric strength test while the motor and speed controller are connected.

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

For more information about compliance with regulations on chemical substances in Oriental Motor's Products, click here.