ORIENTAL MOTOR CO., LTD.

Watertight, Dust-Resistant Motors FPW Series

FPW690A2-60U

Stampa tutte le informazioni sul prodotto in una volta sola
FPW690A2-60U

Geared Motor

Classificazione prodotto Nome del prodotto Prezzo di listino Data di spedizione
Geared Motor FPW690A2-60U 444.00 € Up to 5 pcs Estimated Ship 5weeks

Notice: The shipping date refers to the time of dispatch from the warehouse in Düsseldorf/Germany. Shipments with 30 pieces or more will require air freight.

Incluso

  • Geared Motor: Capacitor, Capacitor Cap, Mounting Screws, Parallel Key

Specifiche

Dimensioni

Geared Motor

Geared Motor

Capacitor

Capacitor

Scarica i dati

Altre Specifiche

General Specifications

Item Specifications
Insulation Resistance After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise After rated operation at normal ambient temperature and humidity, the winding temperature rise measured using the resistance change method was 80 °C max. (70 °C max. for three-phase type).
Thermal Class 130 (B)
Overheat Protective Device Built-in thermal protector (automatic return type) Open: 130 ±5 °C, Return: 85 ±20 °C
Operating Ambient Temperature Single-phase 100 VAC, single-phase 200 VAC, three-phase 200 VAC: -10~+50 °C (Non-freezing)
Other voltages: -10~+40 °C (Non-freezing)
Degree of Protection IP67

Note

  • Since this is a special geared motor with a watertight and dust-resistant structure, decomposition of the motor part and gearhead part is not possible.
  • The structure of the motor capacitor is not watertight or dust resistant.

Permissible Radial Load and Permissible Axial Load

Product Name Gear Ratio Maximum Permissible Torque
N·m		 Permissible Radial Load N Permissible Axial Load
N
From Shaft End
10 mm		 From Shaft End
20 mm
FPW425 3~18 8.0 100 150 50
25~180 200 300
FPW540 3~18 10 250 350 100
25~180 300 450
FPW560 3~9 15 400 500 150
12.5~18 450 600
25~180 500 700
FPW690 3~9 30 550 800 200
12.5~180 650 1000
Radial Load and Axial Load

Standard

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with safety standards for each of our product models can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

For more information about compliance with regulations on chemical substances in Oriental Motor's Products, click here.

Configurazione del sistema

system configuration

Cavi e accessori

Scarica i dati
close