Electromagnetic Brake Motors KII Series (New standard)
5RK40A-UCMT2
Motor
Questo prodotto non è più disponibile per la vendita.
| Classificazione prodotto | Nome del prodotto | Prezzo di listino | Data di spedizione |
|---|---|---|---|
| Motor | 5RK40A-UCMT2 | - | Prodotto fuori produzione (31.3.2024 fuori produzione) |
Incluso
- Motor, Capacitor, Capacitor Cap, Operating Manual
Specifiche
Caratteristiche
Starting and Braking Characteristics (Reference values)
Dimensioni
Motor/Gearhead
Capacitor
Scarica i dati
Altre Specifiche
General Specifications
| Item | Specifications |
|---|---|
| Insulation Resistance | After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger. |
| Dielectric Strength | After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute. |
| Temperature Rise | A gearhead or equivalent heat sink*1 is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.) |
| Thermal Class | 130 (B) |
| Overheat Protective Device | The 6 W type is impedance protected Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 85 ± 20 °C |
| Operating Ambient Temperature | Three-phase 200 V, Single-phase 100 V, Single-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing) For gearhead gear ratios 2 or 3 the lower temperature limit is 0 °C. |
| Operating Ambient Humidity | 85 % max. (Non-condensing) |
| Degree of Protection |
Terminal box type:
IP66*2 (Excluding mounting surface of the round shaft type)
IP20 (60 W, 90 W) Lead wire type:
IP20 (6 W, 15 W, 25 W)
Cable Type:
IP40 (40 W)
IP20 (60 W, 90 W) |
- *1
- Heat Sink Size (Material: Aluminum)
| Motor Type (Output) |
Size (mm) |
Thickness (mm) |
|---|---|---|
| 6 W Type | 115 x 115 | 5 |
| 15 W Type | 125 x 125 | |
| 25 W Type | 135 x 135 | |
| 40 W Type | 165 x 165 | |
| 60 W, 90 W Type | 200 x 200 |
- *2
- For Materials and Surface Treatments
| Type | Output Power | Materials | Surface Treatment |
|---|---|---|---|
| Parallel shaft Combination Round Shaft |
40 W | Motor case, terminal box: Aluminum Output shaft: S45C Screws: Stainless steel (externally facing screws only) |
Motor case, terminal box: Painted (excluding installation surface) |
Permissible Radial Load and Permissible Axial Load of Round Shaft
| Product Name | Permissible Radial Load N | Permissible Axial Load | |
|---|---|---|---|
| Distance From the End of the Motor Output Shaft | |||
| 10 mm | 20 mm | ||
| 2IK6 2RK6 |
50 | 110 | Half of the motor mass or less* |
| 3IK15 3RK15 |
40 | 60 | |
| 4IK25 4RK25 |
90 | 140 | |
| 5IK40 5RK40 |
140 | 200 | |
| 5IK60 5IK90 5RK60 5RK90 |
240 | 270 | |
- * Avoid applying axial loads as much as possible.
If an axial load is unavoidable, keep it at half or less of the motor mass.
Configurazione del sistema
Cavi e accessori
close