AC Speed Control Motors Motor for "Motor and Driver Package"

4IK25UGV-JC

4IK25UGV-JC

Motor

Questo prodotto non è più disponibile per la vendita.

Classificazione prodotto	Nome del prodotto	Prezzo di listino	Data di spedizione
Motor	4IK25UGV-JC	-	Prodotto fuori produzione (31.3.2020 fuori produzione)

• This product is a motor only (component) of the speed control motor and controller package.

Specifiche

Altre Specifiche

General Specifications

Item		Motor	Speed Controller
Insulation Resistance		100 MΩ or more when a 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.	100 MΩ min. when a 500 VDC megger is applied between the main circuit terminal and the control circuit terminal, between the main circuit terminal and the case, and between the main circuit terminal and FG after continuous operation under normal ambient temperature and humidity.
Dielectric Strength		No abnormality is observed when 1.5 kVAC at 50 Hz or 60 Hz applied between the coils and case for 1 minute after continuous operation under normal ambient temperature and humidity.	No abnormality is observed when 1.9 kVAC is applied at 50 Hz or 60 Hz between the main circuit terminal and the control circuit terminal and between the main circuit terminal and the case, and when 1.5 kVAC is applied at 50 Hz or 60 Hz between the main circuit terminal and FG, for 1 minute after continuous operation under normal ambient temperature and humidity.
Temperature Rise		A gearhead or equivalent heat sink * is connected to the motor, and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous operation with no load under normal ambient temperature and humidity.	-
Overheat Protective Device		MSCI26 Type is impedance-protected All other motors have a built-in thermal protector (automatic return type) Open: 130±5℃, Reset: 85±20℃	-
Operating Environment	Ambient Temperature	Single-Phase 100 VAC, 200 VAC: -10~+50°C (Non-freezing) Single-Phase 100/115 VAC, 200/230 VAC: -10~+40°C (Non-freezing)	0∼+50°C (Non-freezing)
	Ambient Humidity	85 % max. (Non-condensing)
	Altitude	Up to 1000 m above sea level
Thermal Class		130(B)	-
Degree of Protection		IP20	IP20

*Heat Sink Size (Material: Aluminum)

Motor Output Power	Size (mm)	Thickness (mm)
6 W	115x115	5
15 W	125x125
25 W	135x135
40 W	165x165
60 W	200x200
90 W	200x200

Note

Do not measure insulation resistance or perform a dielectric strength test while the motor and speed controller are connected.

Specifiche
Altre Specifiche