ORIENTAL MOTOR CO., LTD.

Induction Motors

4IK25FB-60SS

Stampa tutte le informazioni sul prodotto in una volta sola
4IK25FB-60SS

Combi geared motor

  Questo prodotto non è più disponibile per la vendita.
Classificazione prodotto Nome del prodotto Prezzo di listino Data di spedizione
Combi geared motor 4IK25FB-60SS - Prodotto fuori produzione
(1.4.2015 fuori produzione)

Incluso

  • Motor, Capacitor, Capacitor Cap, Gearhead, Mounting Screws, Parallel Key, Operating Manual

Specifiche

Dimensioni

Capacitor

Capacitor

Scarica i dati

Altre Specifiche

General Specifications

Item Specifications
Insulation Resistance After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise A gearhead or equivalent heat sink* is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.)
Thermal Class 130 (B)
Overheat Protective Device　　

Thermal protector operating temperature Open: 130±5 °C, Return: 90±15 °C (normally closed)
Contact specification Rated Operating Voltage and Rated Conduction Current (Resistive load): 250 VAC 5 A, 26 VDC 13 A
Minimum load condition: 85 VAC 50 mA, 5 VDC 5 mA
Initial Contact Resistance: 50 mΩ max.
Operating Ambient Temperature Single-phase 100 V, single-phase 200 V, three-phase 200 V: -10~+50 °C (Non-freezing)
Other voltages: -10~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection IP65 (Excluding mounting surface of the round shaft type)
  • * Heat Sink Size (Material: Aluminum)
Motor Type (Output Power) Size (mm)   Thickness (mm)
6 W type 115 x 115 5
15 W type 125 x 125
25 W type 135 x 135
40 W type 165 x 165

Permissible Radial Load and Permissible Axial Load of Gearhead

Product Name Gear Ratio Maximum Permissible Torque
N·m		 Permissible Radial Load N Permissible Axial Load
N
From Shaft End
10 mm		 From Shaft End
20 mm
2GN□S 3~18 3.0 50 80 30
25~180 120 180
3GN□S 3~18 5.0 80 120 40
25~180 150 250
4GN□S 3~18 8.0 100 150 50
25~180 200 300
5GN□S 3~18 10 250 350 100
25~180 300 450
Radial Load and Axial Load

Configurazione del sistema

System Configuration

Cavi e accessori

Scarica i dati
close