ORIENTAL MOTOR CO., LTD.

Induction Motors KII Series

3IK15AW-360U

Stampa tutte le informazioni sul prodotto in una volta sola
3IK15AW-360U

Combi geared motor

  Questo prodotto non è più disponibile per la vendita.
Classificazione prodotto Nome del prodotto Prezzo di listino Data di spedizione
Combi geared motor 3IK15AW-360U - Prodotto fuori produzione
(31.3.2019 fuori produzione)

Incluso

  • Motor, Gearhead, Capacitor, Capacitor Cap, Installation Screws, Parallel Key, Operating Manual

Specifiche

Scarica i dati

Altre Specifiche

General Specifications

Item Specifications
Insulation Resistance After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise After rated operation at normal ambient temperature and humidity, the winding temperature rise measured using the resistance change method was 80 °C max. (70 °C max. for three-phase type).
Thermal Class 130(B)
Overheat Protective Device The 6 W type is impedance protected
Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 85 ± 20 °C
Operating Ambient Temperature Single-phase 100 VAC, single-phase 200 VAC, three-phase 200 V: -10~+50 °C (Non-freezing)
Other voltages: -10~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection IP20

Permissible Radial Load and Permissible Axial Load of Gearhead

Product Name Gear Ratio Maximum Permissible Torque
N·m		 Permissible Radial Load N Permissible Axial Load
N
Distance from the End of the Gearhead Output Shaft
10 mm 20 mm
2GV□
2GV□B		 2 6 100 150 15
3 100 150 30
5~25 150 200 40
30~360 200 300
2GV□B 500~3600 200 300
3GV□
3GV□B		 2 10 150 250 20
3 150 250 40
5~25 200 300 80
30~360

300

 400
3GV□B 500~3600 300 400
4GV□
4GV□B		 2 16 300 350 25
3 300 350 50
5~25 300 350 100
30~360 450 550
4GV□B 500~3600 450 550
5GV□
5GV□B
5GVH□
5GVH□B
5GVH□BS
5GVH□BSF		 2 30 250 350 100
3~9 400 500 150
12.5~18 450 600
25~300 500 700
5GV□B 360~3000 500 700
5GVR□
5GVR□B		 2 40 250 350 100
3~9 400 500 150
12.5~18 450 600
25~180 500 700
7GV□B 5~20 70 700 850 200
30~100 1400 1700 400

Configurazione del sistema

System Configuration

Prodotti correlati

Brake Pack

Products Features
SB50W Series
SB50W Series
Features

This is a brake pack that enables instantaneous stopping, bidirectional rotation, and brake control of the motor, all in 1 unit.

This brake pack can increase the safety of equipment through the thermal protector open detection function.

In addition, alarm resetting by external signals is now possible, making it easier to use.

  • Supports Wide Voltage Range (100-230 V)
  • 48 mm × 48 mm DIN size
  • Conforms to Safety Standards
  • Compatible with 1 W~90 W Motors
  • Can Switch Sink/Source Logic

Cavi e accessori

Scarica i dati
close