Induction Motors KII Series

2IK6A2C-6

2IK6A2C-6

Combi geared motor

  Questo prodotto non è più disponibile per la vendita.
Classificazione prodotto Nome del prodotto Prezzo di listino Data di spedizione
Combi geared motor 2IK6A2C-6 - Prodotto fuori produzione
(31.3.2022 fuori produzione)

Incluso

  • Motor, Gearhead, Closed-End Connector, Mounting Screws, Parallel Key, Operating Manual

Specifiche

Altre Specifiche

General Specifications

Item Specifications
Insulation Resistance 100 MΩ or more when a 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.
Dielectric Strength No abnormality is observed when 1.5 kVAC at 50 Hz or 60 Hz applied between the coils and case for 1 minute after continuous operation under normal ambient temperature and humidity.
Temperature Rise Winding temperature rise is 80 °C max. measured by the resistance change method after continuous operation with no load under normal ambient temperature and humidity.
*When the round shaft type is mounted on a heat sink (Material: aluminum) of 115 mm × 115 mm and 5 mm thickness
Thermal Class 130 (B)
Overheat Protective Device Impedance Protected
Operating Ambient Temperature -10~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection IP20

Permissible Radial Load and Permissible Axial Load of Gearhead

Type Product Name Gear Ratio Permissible Radial Load N Permissible Axial Load
N
From the End of the Output Shaft
10 mm
From the End of the Output Shaft
20 mm
Combination Type 2IK6A2C-□
2IK6C2C-□
5~25 150 200 40
30~360 200 300
Round Shaft Type 2IK6A-A2C
2IK6A-C2C
50 110 Half of motor mass or less  

Configurazione del sistema

System Configuration

Prodotti correlati

Brake Pack

Products Features
SB50W Series
SB50W Series
Features

This is a brake pack that enables instantaneous stopping, bidirectional rotation, and brake control of the motor, all in 1 unit.

This brake pack can increase the safety of equipment through the thermal protector open detection function.

In addition, alarm resetting by external signals is now possible, making it easier to use.

  • Supports Wide Voltage Range (100-230 V)
  • 48 mm × 48 mm DIN size
  • Conforms to Safety Standards
  • Compatible with 1 W~90 W Motors
  • Can Switch Sink/Source Logic

Cavi e accessori

close