Cables: For AZ Series DC Input Multi-Axis Driver

AZ Series DC Input Cable Configuration Diagram for Multi-Axis Drivers
  • * Be sure to use a connection cable for the connection between the motor and the driver.
    (The motor cable and electromagnetic brake cable from the motor cannot be connected directly to the driver.)
Number in Illustration
Applicable Cable Name
[1] [For AZM14, AZME14, AZM15, AZM24, AZME24, AZM26, AZME26, DGM60, DR20, DR28] Connection Cable, Flexible Connection Cable
[For AZM46, AZM48, AZM66, AZM69
DGB85, DGM85, DGB130, DGM130
DRSM42, DRSM60, LM2, LM4]
Connection Cable, Flexible Connection Cable
  • *Use flexible cables in applications where the cables are bent. Click here for note on the use of flexible cables

Connection Cable

This cable can be used to connect the motor with driver.

[1] Connection Cable, Flexible Connection Cable
(For AZM14, AZME14, AZM15, AZM24, AZME24, AZM26, AZME26, DGM60, DR20, DR28)

For Motor
Connection Cable for Motor
For Electromagnetic Brake*
Connection Cables for Electromagnetic Brakes
  • *Required for AZME24MK and AZME26MK.

Note on Use of Flexible Cables

[1] Connection Cable, Flexible Connection Cable
(For AZM46, AZM48, AZM66, AZM69 DGB85, DGM85, DGB130, DGM130 DRSM42, DRSM60, LM2, LM4)

For motor
Connection Cable for Motor
For Electromagnetic Brake*
Connection Cables for Electromagnetic Brakes
  • *Required for electromagnetic brake motors.

Note on Use of Flexible Cables

Other Cables

Lead wires with connector for exclusive use with AZ Series multi-axis drivers. The main power supply and control power supply sections can be easily connected.

[2] Power Supply Cable

Product Name Applicable Length
(m)
Conductor AWG
Power Supply Cable for Main Power Supply
LC03D06A For main power supply 0.6 16 (1.25 mm2)
Power Supply Cable for Control Power Supply
LC02D06A For control power supply 20 (0.5 mm2)

Cable Note When Wiring Flexible Cable

Do not bend the cable at the connector. Stress applied to the connectors and terminals causes poor contact and disconnection.

How to Fix the Cable

Fix the connector part in 2 places to prevent it from moving.

Fix the connector part in 2 places to prevent it from moving.

Wiring Length and Bending Radius of the Cable

Wiring should be installed at an appropriate length, so that cables are not pulled during movement.
In addition, the bending radius (R) should be 6 times the cable diameter min.

Wiring should be installed at an appropriate length, so that cables are not pulled during movement.

Interference of the Cable

Wire the cables in the cable holder without bringing them into contact with each other. This will add stress to the cable, and cause it to break prematurely. Please check note on cable holders carefully before use.

Cable Kinks

◇Please wire without kinks in the cable. Kinking in a twisted state can cause premature disconnection. After wiring, confirm that there are no kinks in the cable, using the print on the cable surface as a reference.