ORIENTAL MOTOR CO., LTD.

AC Speed Control Motors US Series

M425-401

Produktinformationen gesammelt ausdrucken
M425-401

Motor

Produktklassifikation Produktname Preis Versand
Motor M425-401 Not available for purchase
• This product is a motor only (component) of the speed control motor and controller package.
Notice: The shipping date refers to the time of dispatch from the warehouse in Düsseldorf/Germany. Shipments with 30 pieces or more will require air freight.

Inklusive

  • Motor: None

Spezifikationen

Weitere Spezifikationen

General Specifications

Item Motor Speed Controller
Insulation Resistance 100 MΩ or more when a 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.
 
 		 After rated operation at normal ambient temperature and humidity, the value measured with a 500 VDC megger between the power supply terminal and FG terminal is min. 100 MΩ.
 
 
Dielectric Strength After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kVAC at 50 Hz or 60 Hz between the coils and the case for 1 minute.
 
 		 No abnormality is observed even with an application of 1.5 kVAC at 50 Hz or 60 Hz between the power supply terminal and FG terminal for 1 minute after rated operation at normal ambient temperature and humidity.
 
 
Temperature Rise  
After no-load rated operation at normal ambient temperature and humidity, the motor surface temperature rise measured by the thermometer method is 55 °C max.
(45°C or less for a US560, US590 Type).		 -
Overheat Protective Device US560, US590 Type with Built-In Thermal Protector (Automatic Reset Type)
Open: 120±5℃ Reset: 77±15℃		 -
Operating Environment Ambient Temperature 6 W~40 W: -10~+40°C (Non-freezing)
60 W, 90 W: -10~+50°C (Non-freezing)		 0∼+40 °C (Non-freezing)
Ambient Humidity 85 % max. (Non-condensing)
Thermal Class 120(E) -

Note

    Do not perform an insulation resistance measurement or a dielectric strength test while the motor and speed controller are connected.

Standards

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

For more information about compliance with regulations on chemical substances in Oriental Motor's Products, click here.

close