Induction Motors KII Series

4IK25AW-50J

Dieses Produkt ist derzeit nicht mehr zum Verkauf verfügbar.

Produktklassifikation	Produktname	Preis	Versand
Combi geared motor	4IK25AW-50J	-	Eingestelltes Produkt (Produktionsende 31.3.2019)

Motor, Gearhead, Capacitor, Capacitor Cap, Installation Screws, Parallel Key, Operating Manual

Spezifikationen

Item	Specifications
Insulation Resistance	After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength	After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise	After rated operation at normal ambient temperature and humidity, the winding temperature rise measured using the resistance change method was 80 °C max. (70 °C max. for three-phase type).
Thermal Class	130(B)
Overheat Protective Device	The 6 W type is impedance protected Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 85 ± 20 °C
Operating Ambient Temperature	Single-phase 100 VAC, single-phase 200 VAC, three-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing)
Operating Ambient Humidity	85 % max. (Non-condensing)
Degree of Protection	IP20

Product Name	Gear Ratio	Maximum Permissible Torque N·m	Permissible Radial Load N		Permissible Axial Load N
			Distance from the End of the Gearhead Output Shaft
			10 mm	20 mm
2GV□ 2GV□B	2	6	100	150	15
	3		100	150	30
	5~25		150	200	40
	30~360		200	300
2GV□B	500~3600		200	300
3GV□ 3GV□B	2	10	150	250	20
	3		150	250	40
	5~25		200	300	80
	30~360		300	400
3GV□B	500~3600		300	400
4GV□ 4GV□B	2	16	300	350	25
	3		300	350	50
	5~25		300	350	100
	30~360		450	550
4GV□B	500~3600		450	550
5GV□ 5GV□B 5GVH□ 5GVH□B 5GVH□BS 5GVH□BSF	2	30	250	350	100
	3~9		400	500	150
	12.5~18		450	600
	25~300		500	700
5GV□B	360~3000		500	700
5GVR□ 5GVR□B	2	40	250	350	100
	3~9		400	500	150
	12.5~18		450	600
	25~180		500	700
7GV□B	5~20	70	700	850	200
7GV□B	30~100	70	1400	1700	400

System Configuration

Products	Features
SB50W Series	Features	This is a brake pack that enables instantaneous stopping, bidirectional rotation, and brake control of the motor, all in 1 unit. This brake pack can increase the safety of equipment through the thermal protector open detection function. In addition, alarm resetting by external signals is now possible, making it easier to use. Supports Wide Voltage Range (100-230 V) 48 mm × 48 mm DIN size Conforms to Safety Standards Compatible with 1 W~90 W Motors Can Switch Sink/Source Logic

Daten-Download