Electromagnetic Brake Motors KII Series (New standard)
5RK40UCM-12.5
Combi geared motor
Dieses Produkt ist derzeit nicht mehr zum Verkauf verfügbar.
| Produktklassifikation | Produktname | Preis | Versand |
|---|---|---|---|
| Combi geared motor | 5RK40UCM-12.5 | - | Eingestelltes Produkt (Produktionsende 31.3.2024) |
Inklusive
- Motor, Gearhead, Capacitor, Capacitor Cap, Installation Screws, Parallel Key, Operating Manual
Spezifikationen
Kennlinien
Starting and Braking Characteristics (Reference values)
Starting and Braking Characteristics (Reference values)
Abmessungen
Daten-Download
Weitere Spezifikationen
General Specifications
| Item | Specifications |
|---|---|
| Insulation Resistance | After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger. |
| Dielectric Strength | After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute. |
| Temperature Rise | A gearhead or equivalent heat sink*1 is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.) |
| Thermal Class | 130 (B) |
| Overheat Protective Device | The 6 W type is impedance protected Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 85 ± 20 °C |
| Operating Ambient Temperature | Three-phase 200 V, Single-phase 100 V, Single-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing) For gearhead gear ratios 2 or 3 the lower temperature limit is 0 °C. |
| Operating Ambient Humidity | 85 % max. (Non-condensing) |
| Degree of Protection |
Terminal box type:
IP66*2 (Excluding mounting surface of the round shaft type)
IP20 (60 W, 90 W) Lead wire type:
IP20 (6 W, 15 W, 25 W)
Cable Type:
IP40 (40 W)
IP20 (60 W, 90 W) |
- *1
- Heat Sink Size (Material: Aluminum)
| Motor Type (Output) |
Size (mm) |
Thickness (mm) |
|---|---|---|
| 6 W Type | 115 x 115 | 5 |
| 15 W Type | 125 x 125 | |
| 25 W Type | 135 x 135 | |
| 40 W Type | 165 x 165 | |
| 60 W, 90 W Type | 200 x 200 |
- *2
- For Materials and Surface Treatments
| Type | Output Power | Materials | Surface Treatment |
|---|---|---|---|
| Parallel shaft Combination Round Shaft |
40 W | Motor case, terminal box: Aluminum Output shaft: S45C Screws: Stainless steel (externally facing screws only) |
Motor case, terminal box: Painted (excluding installation surface) |
Permissible Radial Load and Permissible Axial Load of Gearhead
| Product Name | Gear Ratio | Maximum Permissible Torque N·m |
Permissible Radial Load N | Permissible Axial Load N |
|
|---|---|---|---|---|---|
| Distance from the End of the Gearhead Output Shaft | |||||
| 10 mm | 20 mm | ||||
| 2GV□ 2GV□B |
2 | 6 | 100 | 150 | 15 |
| 3 | 100 | 150 | 30 | ||
| 5~25 | 150 | 200 | 40 | ||
| 30~360 | 200 | 300 | |||
| 2GV□B | 500~3600 | 200 | 300 | ||
| 3GV□ 3GV□B |
2 | 10 | 150 | 250 | 20 |
| 3 | 150 | 250 | 40 | ||
| 5~25 | 200 | 300 | 80 | ||
| 30~360 |
300 |
400 | |||
| 3GV□B | 500~3600 | 300 | 400 | ||
| 4GV□ 4GV□B |
2 | 16 | 300 | 350 | 25 |
| 3 | 300 | 350 | 50 | ||
| 5~25 | 300 | 350 | 100 | ||
| 30~360 | 450 | 550 | |||
| 4GV□B | 500~3600 | 450 | 550 | ||
| 5GV□ 5GV□B 5GVH□ 5GVH□B 5GVH□BS 5GVH□BSF |
2 | 30 | 250 | 350 | 100 |
| 3~9 | 400 | 500 | 150 | ||
| 12.5~18 | 450 | 600 | |||
| 25~300 | 500 | 700 | |||
| 5GV□B | 360~3000 | 500 | 700 | ||
| 5GVR□ 5GVR□B |
2 | 40 | 250 | 350 | 100 |
| 3~9 | 400 | 500 | 150 | ||
| 12.5~18 | 450 | 600 | |||
| 25~180 | 500 | 700 | |||
| 7GV□B | 5~20 | 70 | 700 | 850 | 200 |
| 30~100 | 1400 | 1700 | 400 | ||
Systemkonfiguration
Kabel und Zubehör
close
close
close