Induction Motors

3IK15SB-180S

Dieses Produkt ist derzeit nicht mehr zum Verkauf verfügbar.

Produktklassifikation	Produktname	Preis	Versand
Combi geared motor	3IK15SB-180S	-	Eingestelltes Produkt (Produktionsende 1.4.2015)

Spezifikationen

Item	Specifications
Insulation Resistance	After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength	After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise	A gearhead or equivalent heat sink^* connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.)
Thermal Class	130(B)
Overheat Protective Device	The 6 W type is impedance protected Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 82 ± 15 °C Three-Phase 15 W Type Open: 130 ± 5 °C, Return: 90 ± 15 °C
Operating Ambient Temperature	Single-phase 100 VAC, single-phase 200 VAC, three-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing)
Operating Ambient Humidity	85 % max. (Non-condensing)
Degree of Protection	IP65 (Excluding mounting surface of the round shaft type)

Product Name	Gear Ratio	Maximum Permissible Torque N·m	Permissible Radial Load N		Permissible Axial Load N
Product Name	Gear Ratio	Maximum Permissible Torque N·m	From Shaft End 10 mm	From Shaft End 20 mm	Permissible Axial Load N
2GN□S	3~18	3.0	50	80	30
2GN□S	25~180	3.0	120	180	30
3GN□S	3~18	5.0	80	120	40
3GN□S	25~180	5.0	150	250	40
4GN□S	3~18	8.0	100	150	50
4GN□S	25~180	8.0	200	300	50
5GN□S	3~18	10	250	350	100
5GN□S	25~180	10	300	450	100

System Configuration

Daten-Download