αSTEP Battery-Free Built-In Absolute Encoder AZ Series
AZD-APN
Control Circuit
| Produktklassifikation | Produktname | Preis | Versand |
|---|---|---|---|
| Control Circuit | AZD-APN | 618.00 € | Up to 20 pcs Estimated Ship 4weeks |
Inklusive
- Control Circuit: Main Power Supply/Regeneration Resistor Connector (CN4), Control Power Supply Input, Electromagnetic Brake Connection, Regeneration Resistor Thermal Input, Power Removal I/O Signal Connector (CN1), I/O Signal Connector (CN7), Connector Wiring Lever
Spezifikationen
Abmessungen
Control Circuit
Daten-Download
Weitere Spezifikationen
Driver Specifications
| Driver Product Name | AZD-AD, AZD-CD | AZD-AM3, AZD-CM3 AZD-AS3, AZD-CS3 |
AZD-AEP, AZD-CEP AZD-AED, AZD-CED AZD-APN, AZD-CPN AZD-AX, AZD-CX AZD-A, AZD-C |
|
|---|---|---|---|---|
| Interface |
Pulse Input | － | － |
|
| Control Input | 10 Points Photocoupler |
4 Points Photocoupler |
6 Points Photocoupler |
|
| Pulse output | 2 Points Line Driver |
－ | 2 Points Line Driver |
|
| Control output | 6 Points Photocoupler and Open-Collector |
3 Points Photocoupler and Open-Collector |
6 Points Photocoupler and Open-Collector |
|
| Power Shut Down Input Signals |
2 Points Photocoupler |
|||
| Power Shut Down Monitor Output |
1 Point Photocoupler and Open-Collector |
|||
Driver function
| Built-In Controller Type | Pulse Input Type with RS-485 Communication | Pulse Input Type |
EtherNet/IP Compatible PROFINET Compatible |
||||
|---|---|---|---|---|---|---|---|
| Number of Positioning Data Sets | 256 Points | 256 Points*1 | 256 Points | ||||
| Remote I/O | Input | 16 Points | - | 16 Points | |||
| Output | 16 Points | - | 16 Points | ||||
| Setting Tool | Support Software MEXE02 | ||||||
| Coordinates Management Method | Battery-free Absolute System | ||||||
| Operation | Positioning Operation | Product Line | Positioning Operation | ○ | ○ | ○*1 | ○ |
| Positioning Push-Motion Operation*2 |
○ | ○ | ○*1 | ○ | |||
| Fastening method | Single-motion Operation | ○ | ○ | ○*1 | ○ | ||
| Sequential Operation | ○ | ○ | ○*1 | ○ | |||
| Multistep Speed-Change (Configuration connection) |
○ | ○ | ○*1 | ○ | |||
| Sequence control | Loop Operation (Repeating) |
○ | ○ | ○*1 | ○ | ||
| Event Jump Operation | ○ | ○ | ○*1 | ○ | |||
| Speed Control Operation (Continuous operation) | ○ | ○ | ○*1 | ○ | |||
| Return-To-Home Operation | Return-To-Home Operation | ○ | ○ | ○ | ○ | ||
| High-speed return-to-home operation | ○ | ○ | ○ | ○ | |||
| JOG Operation | ○ | ○ | ○ | ○ | |||
| Monitor/Information | Waveform Monitoring | ○ | ○ | ○ | ○ | ||
| Overload Detection | ○ | ○ | ○ | ○ | |||
| Overheat Detection (Motor and Driver) |
○ | ○ | ○ | ○ | |||
| Position/Speed Information | ○ | ○ | ○ | ○ | |||
| Temperature Detection (Motor and Driver) |
○ | ○ | ○ | ○ | |||
| Motor Load Factor | ○ | ○ | ○ | ○ | |||
| Travel Distance , Cumulative Travel Distance | ○ | ○ | ○ | ○ | |||
| Alarm | ○ | ○ | ○ | ○ | |||
- *1
- It can be used by setting it with the MEXE02 support software.
- *2
- Push-motion operation is not available for the geared motor and electric actuator DGII Series.
Communication Specifications
| Communication Protocol | PROFINET IO Ver.2.4 | |
|---|---|---|
| Vendor ID | 0x33E: ORIENTAL MOTOR | |
| Transmission Rate | 100 Mbps (autonegotiation) | |
| Mode | Full duplex (autonegotiation) | |
| Cable Specification | Shielded twisted pair (STP) cable Straight/cross, Category 5e or higher recommended |
|
| Communication Connector | RJ45 × 2 (shield compatible) | |
| Conformance Class | B | |
| RT/IRT | RT | |
| NetLoad Class | I | |
| Supported Protocols | DCP, LLDP, SNMP, MRP* | |
| Number of Occupied Bytes | Output (Host controller → driver) | 40 bytes |
| Input (Driver → host controller) | 56 bytes | |
| Supported Topologies | Star, Tree, Line, Ring* | |
- *Specifications vary depending on the driver. Identify them using either the Module Software Version or the driver's date of manufacture.
The Module Software Version can be confirmed on either the MEXE02 PROFINET monitor or the host controller's setting tool.- If the Module Software Version is 2.00 or later or the driver's date of manufacture is June 2022 or later
Compatible with MRP and Ring. - If the Module Software Version is 1.00 or earlier or the driver's date of manufacture is May 2022 or earlier
The driver is certified as a 1-port PROFINET product. The LLDP/SNMP information that is output is the same regardless of which communication connector is connected.
Not compatible with MRP or Ring.
- If the Module Software Version is 2.00 or later or the driver's date of manufacture is June 2022 or later
Driver General Specifications
| Item | Specifications | |
|---|---|---|
| Operating Environment (In operation) | Ambient Temperature | 0 to +55 °C (Non-freezing)* |
| Ambient Humidity | 85 % max. (Non-condensing) | |
| Atmosphere | No corrosive gases or dust. No exposure to water, oil or other liquids. | |
- *When installing a heat sink equivalent to an aluminum plate min. 200 × 200 mm, thickness 2 mm
Standards
Regulations and Standards Materials
Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)
Explanations of the Global Laws, Regulations and Standards can be found here.
Information about our compliance with regulations and standards for each of our product series can be found here.
Hazardous Substances
The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).
For more information about compliance with regulations on chemical substances in Oriental Motor's Products, click here.
Systemkonfiguration
Kabel und Zubehör
close