Specifications

Dimensions

Motor

Motor

Other Specifications

General Specifications

Item		Motor	Speed Controller
Insulation Resistance		After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.	After rated operation at normal ambient temperature and humidity, the value measured with a 500 VDC megger between the power supply input terminal and the protective earth terminal, and between the power supply input terminal and the signal terminal is min. 100 MΩ.
Dielectric Strength		No abnormality is observed even with an application of 1.5 kVAC at 50 Hz or 60 Hz between the coils and the case for 1 minute after rated operation at normal ambient temperature and humidity.	After rated operation at normal ambient temperature and humidity, no abnormality is observed even if 50 Hz or 60 Hz, 1.5 kVAC is applied between the power supply input terminal and the protective earth terminal for 1 minute. In addition, no abnormality is observed even after 50 Hz or 60 Hz, 2.3 kVAC (3.0 kV for MSP-2W) is applied between the power supply input terminal and the signal input terminal for 1 minute.
Temperature Rise		After a no load rated operation at normal ambient temperature and humidity, the winding temperature rise measured by the resistance change method with the gearhead or an equivalent heat sink*attached to the motor is 80 °C max.	-
Overheat Protective Device		The MSS206 Type is impedance protected. All other motors have a built-in thermal protector (automatic return type). Open: 130±5℃ Return: 82±15℃	-
Operating Environment	Ambient Temperature	110/115 V, 220/230 V: -10~+40°C (Non-freezing) 100 V, 200 V: -10~+50°C (Non-freezing)	0∼+40 °C (Non-freezing)
	Ambient Humidity	85 % max. (Non-condensing)
	Altitude	Up to 1000 m above sea level
Thermal Class		130(B)	-
Degree of Protection		MSS206, MSS315, MSS 425, MSS 540 Type: IP20 MSS560, MSS590 Type: IP40	IP10

• *Heat Sink Size (Material: Aluminum)

Motor Type (Output power)	Size (mm)	Thickness (mm)
MSS206 Type (6 W)	115x115	5
MSS315 Type (15 W)	125x125
MSS 425 Type (25 W)	135x135
MSS 540 Type (40 W)	165x165
MSS560 Type (60 W)	200x200
MSS590 Type (90 W)	200x200

Note

• Do not measure insulation resistance or perform a dielectric strength test while the motor and speed controller are connected.

Cables and Accessories

• Specifications
• Dimensions
• Other Specifications

Print Product Information All at once