Electric Cylinder EZ-limo EZA Series

EZA4E027M-A

Print Product Information All at once
EZAM4E027MA ESMC-A2

Actuator/Control Circuit

  This product is currently no longer available for sale.
Product Classification Product Name List Price Shipping Date
Actuator / Control Circuit EZA4E027M-A - Discontinued Product
(1.4.2018 discontinued)

Included

  • Actuator, Control Circuit, Circuit Mounting Bracket, User I/O Connector, Sensor I/O Connector, Operating Manual

Specifications

Other Specifications

General Specifications (Motor)

Values are after rated operation at normal ambient temperature and humidity.

24 VDC

Item Specifications
Insulation Resistance

100 MΩ or more when 500 VDC megger is applied between the following places.

  • Between the motor case and excitation/sensor windings
  • Between the motor case and electromagnetic brake winding (electromagnetic brake types only)
Dielectric Strength

No abnormalities observed with application for 1 minute at the following points.

  • Between the motor case and excitation/sensor windings
    0.5 kVAC 50 Hz
  • Between the motor case and electromagnetic brake winding (electromagnetic brake types only)
    0.5 kVAC 50 Hz
Operating Ambient Temperature 0~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)

Note

  • Do not measure insulation resistance or perform a dielectric strength test while the cylinder and controller are connected.

Single-Phase 100/115 VAC, Single-Phase 200/230 VAC

Item Specifications
Insulation Resistance

100 MΩ or more when 500 VDC megger is applied between the following places.

  • Between the motor case and excitation/sensor windings
  • Between the motor case and electromagnetic brake winding (electromagnetic brake types only)
Dielectric Strength

No abnormalities observed with application for 1 minute at the following points.

  • Between the motor case and excitation/sensor windings
    EZA4:
    1.0 kVAC 50 Hz
    EZA6:
    1.5 kVAC 50 Hz
  • Between the motor case and electromagnetic brake winding (electromagnetic brake types only)
    1.0 kVAC 50 Hz
Operating Ambient Temperature 0~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)

Note

  • Do not measure insulation resistance or perform a dielectric strength test while the cylinder and controller are connected.

Circuit Specifications (Controller Mode)

Controller Mode

Item Controller Parts Name
ESMC-K2 ESMC-A2 ESMC-C2
Product Line Stored data type
Power Supply Input Control Power Supply 24 VDC±5 % 1.0 A [0.5 A only for controller (see +0.2 A with teaching pendant, +0.3 A with electromagnetic brake)].
Main Power Supply Voltage 24 VDC±10 % Single-phase 100-115 VAC −15~+10 % Single-phase 200-230 VAC −15~+10 %
Frequency - 50/60 Hz
Current 4.0 A*1 6.0 A*1 3.5 A*1
Positioning
Data		 Setting Mode Absolute mode (absolute-position specification), incremental mode (relative-position specification)
Setting Number 63 points
Setting Method Setting by accessory teaching pendant (EZT1) or data setting software (EZED2) (Stored in EEPROM)
Positioning*2
Control		 Method Sequential positioning, Data-select positioning
Traveling Amount Setting Range -83886.08~+83886.07 mm (in 0.01 mm units)
Starting Speed Setting Range 0.01~200.00 mm/s (in 0.01 mm/s units)
Operating Speed Setting Range 0.01~1500.00 mm/s (in 0.01 mm/s units)
Acceleration/Deceleration Rate Setting Range 0.01~20.00 m/s2 (in 0.01 m/s2 units)
Control Mode
  • External Input Mode (EXT): Mode for monitoring operation, command position, I/O status, and alarm status with external signals
  • Program Mode (PRG): Mode for creating, changing, and clearing operation data
  • Parameter Mode (PAR): Mode for setting and changing parameters for operation and function settings.
  • Test Mode (TST): Mode for manual operation, and I/O checks
Operation Mode Positioning operation, Return-to-home operation, Linked operation (maximum 4 links), Continuous operation
Input Signal/Input Mode START, STOP, HOME/PRESET, FREE, M0~M5, REQ, ACL/CK: 24 VDC Photocoupler input Input resistance 4.7 kΩ
FWD, RVS: 5 VDC Photocoupler input Input resistance 180 Ω or 24 VDC Photocoupler input Input resistance 2.7 kΩ
+LS, −LS, HOMELS: 24 VDC Photocoupler input Input resistance 4.7 kΩ
Output Signal/Output Mode ALM, END/OUTR, MOVE, AREA/OUT0, OUT1: Photocoupler and Open-collector output (24 VDC 10 mA max.)
ASG1, BSG1: Photocoupler and Open-collector output (24 VDC 15 mA max.)
ASG2, BSG2: Line driver output*3
Protective Function Excessive position deviation, overcurrent protection, overvoltage protection, overheat protection, overload, sensor error, overspeed, non-volatile memory error, etc.
Indicator (LED) PWR, ALM PWR, ALM, CHARGE
Cooling Method Natural Cooling Method
Mass 0.44 kg 0.77 kg
*1
The maximum current value varies depending on the linear slide and cylinder to be connected.
[ESMC-K2] ESRM3/ESRM4: 1.0 A ESRM5: 1.1 A EZSM3/EZSM4: 1.7 A EZSM6/SPVM6: 4.0 A EZAM4: 1.7 A EZAM6: 4.0 A
[ESMC-A2] EZSM3/EZSM4: 3.0 A EZSM6/SPVM6: 5.0 A SPVM8: 6.0 A EZAM4: 3.0 A EZAM6: 5.0 A PWAM6: 6.4 A PWAM8: 6.0 A
[ESMC-C2] EZSM3/EZSM4: 2.1 A EZSM6/SPVM6: 3.0 A SPVM8: 3.5 A EZAM4: 2.1 A EZAM6: 3.0 A PWAM6: 3.9 A PWAM8: 3.5 A
*2
Since it varies depending on the linear slide and cylinder to be connected, check the specifications of each series.
*3
The pulse output has a time lag of up to maximum 1 ms with respect to the movement of the linear slide or cylinder. Use to check the linear slide and cylinder stop positions.

Circuit Specifications (Driver Mode)

Driver Mode

Item Controller Parts Name
ESMC-K2 ESMC-A2 ESMC-C2
Power Supply Input Control Power Supply 24 VDC±5 % 1.0 A [0.5 A for Controller only (see +0.2 A with teaching pendant, +0.3 A with electromagnetic brake)].
Main Power Supply Voltage 24 VDC±10 % Single-phase 100-115 VAC −15~+10 % Single-phase 200-230 VAC −15~+10 %
Frequency − 50/60 Hz
Current 4.0 A*1 6.0 A*1 3.5 A*1
Maximum Response Frequency 1-Pulse Input Mode, 2-Pulse Input Mode: 80 kHz, Phase Difference Input Mode: 20 kHz
Operation Mode Return-to-home operation,
Pulse input operation (1-pulse input mode, 2-pulse input mode, phase difference input mode)
Input Signal/Input Mode ACL/CK, FREE, C.OFF, HOME/PRESET, REQ, HMSTOP: 24 VDC Photocoupler input Input resistance 4.7 kΩ FP, RP: 5 VDC Photocoupler input Input resistance 180 Ω or 24 VDC Photocoupler input Input resistance 2.7 kΩ
+LS, −LS, HOMELS: 24 VDC Photocoupler input Input resistance 4.7 kΩ
Output Signal/Output Mode MOVE, END/OUTR, ALM, TIM/OUT0, OUT1: Photocoupler, open-collector output (24 VDC, 10 mA max.) ASG1, BSG1: Photocoupler, open-collector output (24 VDC, 15 mA max.) ASG2, BSG2: Line driver output*2
Protective Function Excessive position deviation, overcurrent protection, overvoltage protection, overheat protection, overload, sensor error, overspeed, non-volatile memory error, etc.
Indicator (LED) PWR, ALM PWR, ALM, CHARGE
Cooling Method Natural Cooling Method
Mass 0.44 kg 0.77 kg
*1
The maximum current value varies depending on the linear slide and cylinder to be connected.
[ESMC-K2] ESRM3/ESRM4: 1.0 A ESRM5: 1.1 A EZSM3/EZSM4: 1.7 A EZSM6/SPVM6: 4.0 A EZAM4: 1.7 A EZAM6: 4.0 A
[ESMC-A2] EZSM3/EZSM4: 3.0 A EZSM6/SPVM6: 5.0 A SPVM8: 6.0 A EZAM4: 3.0 A EZAM6: 5.0 A PWAM6: 6.4 A PWAM8: 6.0 A
[ESMC-C2] EZSM3/EZSM4: 2.1 A EZSM6/SPVM6: 3.0 A SPVM8: 3.5 A EZAM4: 2.1 A EZAM6: 3.0 A PWAM6: 3.9 A PWAM8: 3.5 A
*2
The pulse output has a time lag of up to maximum 1 ms with respect to the movement of the linear slide or cylinder. Use to check the linear slide and cylinder stop positions.

Controller Circuit General Specifications

Values are after rated operation at normal ambient temperature and humidity.

24 VDC

Item Specifications
Insulation Resistance

100 MΩ or more when 500 VDC megger is applied between the following places.

  • Between FG and main power supply input terminal
  • Between FG and I/O connector
Dielectric Strength

No abnormalities observed with application for 1 minute at the following points:

  • Between FG and main power supply input terminal
    0.5 kVAC 50 Hz
  • Between FG and I/O connector
    0.5 kVAC 50 Hz
Operating Ambient Temperature 0~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)

Note

  • Do not measure insulation resistance or perform a dielectric strength test while the linear slide and controller are connected.

Single-Phase 100/115 VAC/Single-Phase 200/230 VAC

Item Specifications
Insulation Resistance

100 MΩ or more when 500 VDC megger is applied between the following places.

  • Between I/O connector, main power supply input terminal, motor cable connector and battery connector
  • Between control power supply terminal and main power supply input terminal, motor connector, battery connector
  • Between protective earth terminal and main power supply input terminal, motor connector, battery connector
Dielectric Strength

No abnormalities observed with application for 1 minute at the following points:

  • Between signal I/O terminal, control power supply input terminal and main power supply input terminal
    1.8 kVAC 50 Hz
  • Between signal I/O terminal, control power supply input terminal and motor output terminal
    1.8 kVAC 50 Hz
  • Between signal I/O terminal and control power supply input terminal and battery input terminal
    1.8 kVAC 50 Hz
  • Between protective earth terminal and main power supply input terminal
    1.5 kVAC 50 Hz
  • Between protective earth terminal and motor output terminal
    1.5 kVAC 50 Hz
  • Between protective earth terminal and battery input terminal
    1.5 kVAC 50 Hz
Operating Ambient Temperature 0~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)

System Configuration

System Configuration

Cables and Accessories

Print Product Information All at once
close