Induction Motors

5IK40SB-120SS

This product is currently no longer available for sale.

Product Classification	Product Name	List Price	Shipping Date
Combi geared motor	5IK40SB-120SS	-	Discontinued Product (1.4.2015 discontinued)

Specifications

Item	Specifications
Insulation Resistance	After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength	After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise	A gearhead or equivalent heat sink^* is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.)
Thermal Class	130 (B)
Overheat Protective Device	Thermal protector operating temperature Open: 130±5 °C, Return: 90±15 °C (normally closed) Contact specification Rated Operating Voltage and Rated Conduction Current (Resistive load): 250 VAC 5 A, 26 VDC 13 A Minimum load condition: 85 VAC 50 mA, 5 VDC 5 mA Initial Contact Resistance: 50 mΩ max.
Operating Ambient Temperature	Single-phase 100 V, single-phase 200 V, three-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing)
Operating Ambient Humidity	85 % max. (Non-condensing)
Degree of Protection	IP65 (Excluding mounting surface of the round shaft type)

Product Name	Gear Ratio	Maximum Permissible Torque N·m	Permissible Radial Load N		Permissible Axial Load N
Product Name	Gear Ratio	Maximum Permissible Torque N·m	From Shaft End 10 mm	From Shaft End 20 mm	Permissible Axial Load N
2GN□S	3~18	3.0	50	80	30
2GN□S	25~180	3.0	120	180	30
3GN□S	3~18	5.0	80	120	40
3GN□S	25~180	5.0	150	250	40
4GN□S	3~18	8.0	100	150	50
4GN□S	25~180	8.0	200	300	50
5GN□S	3~18	10	250	350	100
5GN□S	25~180	10	300	450	100