Induction Motors KII Series

2IK6C2C-120

Print Product Information All at once
2IK6C2C-120

Combi geared motor

  This product is currently no longer available for sale.
Product Classification Product Name List Price Shipping Date
Combi geared motor 2IK6C2C-120 - Discontinued Product
(31.3.2022 discontinued)

Included

  • Motor, Gearhead, Closed-End Connector, Mounting Screws, Parallel Key, Operating Manual

Specifications

Other Specifications

General Specifications

Item Specifications
Insulation Resistance 100 MΩ or more when a 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.
Dielectric Strength No abnormality is observed when 1.5 kVAC at 50 Hz or 60 Hz applied between the coils and case for 1 minute after continuous operation under normal ambient temperature and humidity.
Temperature Rise Winding temperature rise is 80 °C max. measured by the resistance change method after continuous operation with no load under normal ambient temperature and humidity.
*When the round shaft type is mounted on a heat sink (Material: aluminum) of 115 mm × 115 mm and 5 mm thickness
Thermal Class 130 (B)
Overheat Protective Device Impedance Protected
Operating Ambient Temperature -10~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection IP20

Permissible Radial Load and Permissible Axial Load of Gearhead

Type Product Name Gear Ratio Permissible Radial Load N Permissible Axial Load
N
From the End of the Output Shaft
10 mm		 From the End of the Output Shaft
20 mm
Combination Type 2IK6A2C-□
2IK6C2C-□		 5~25 150 200 40
30~360 200 300
Round Shaft Type 2IK6A-A2C
2IK6A-C2C		 − 50 110 Half of motor mass or less  

System Configuration

System Configuration

Related Products

Brake Pack

Products Features
SB50W Series
SB50W Series
Features

This is a brake pack that enables instantaneous stopping, bidirectional rotation, and brake control of the motor, all in 1 unit.

This brake pack can increase the safety of equipment through the thermal protector open detection function.

In addition, alarm resetting by external signals is now possible, making it easier to use.

  • Supports Wide Voltage Range (100-230 V)
  • 48 mm × 48 mm DIN size
  • Conforms to Safety Standards
  • Compatible with 1 W~90 W Motors
  • Can Switch Sink/Source Logic

Cables and Accessories

Print Product Information All at once
close