Features | Brushless Motor Stainless Steel Type 200 W

This motor has excellent dustproof and waterproof performance, having passed 2 degree of protection tests, IP67 and IP69K, and can withstand high temperature and high pressure cleaning. It is suitable for use in environments where equipment used in food factories etc. is installed, where water is present, or where cleaning is required during changeovers.

Degree of Protection and Level of Protection

	Dustproof	Watertight
IP	6	9K

Dustproof

IP Rating	6	Completely dustproof structure Completely protected against dust ingress

Watertight

IP Rating	7	Usable even when submerged under the following conditions Immersion to a depth of 1 m for 30 minutes
	9K	Protected against powerful water jets at high temperatures and pressures High pressure (8~10 MPa) and high temperature (80 °C) water jets from close range

• "IP67" The IP rating, which indicates dustproof and waterproof performance, is specified in IEC 60529 and IEC 60034-5.
• IPX9K is specified in DIN 40 050-9.

Stainless steel material equivalent to SUS304 is used for superior corrosion resistance.
Since it is not painted, there will be no peeling of the paint.

Compact and Lightweight

Smaller and more lightweight compared to AC motors with the same output power.

High Efficiency Equivalent to IE5, Low Heat Generation

High efficiency motor with motor efficiency of 80 % (IE5 equivalent*). Running costs can be reduced due to higher efficiency compared to IE3 equivalent stainless steel type AC motors. In addition, the motor that low heat generation because highly efficient.

• *The "IE5 efficiency standard" is 76.2 %. Efficiency standard value (%) for speed control motors (rated speed 1801-6000 r/min) based on IEC TS 60034-30-2.

Combined With Oriental Motor BLE2 Series Drivers

• The distance between the motor and driver can be extended up to 20 m.
• Oriental Motor provides the cables connecting the motor and driver.
• BLE2 Series driver is used. (For stainless steel type only)

Combination With Inverter

• Combinable inverters are inverters that can be combined with PM motors.
• The cable between the motor and inverter must be provided by the customer.

Motor

Output Shaft Type	Output Power [W]	Frame Size [mm]	Gear Ratio	Mass [kg]	IP Classification
Hollow Shaft Flat Gearhead	200	104 mm (Gearhead section is 110 mm)	10, 15, 20, 30, 50	13.5	IP67*1 IP69K*2

*1

The IP indication that shows the watertight and dust-resistant performance are specified under IEC 60529 and IEC 60034-5. Excluding connectors for driver connection.

*2

IPX9K is specified in DIN 40 050-9. Excluding connectors for mounting surface, cable, and driver connection.

Driver (BLE2 Series driver for stainless steel type motor)

	Output Power [W]	Voltage [V]	IP Classification
	200	Single-phase 100-120 VAC/ Single-phase, Three-phase 200-240 VAC	IP20

Connection Cable

Connection Cable Between Motor and Driver
	Connection cable/Flexible connection cable Max. 20 m