Torque Motors TM Series
TM306C-AE
Motor/Control Circuit
This product is currently no longer available for sale.
| Product Classification | Product Name | List Price | Shipping Date |
|---|---|---|---|
| Motor / Control Circuit | TM306C-AE | €226.00 | Discontinued Product (31.3.2026 discontinued) |
Included
- Motor: Capacitor, Capacitor Cap
Control Circuit: None
Specifications
Characteristics
Speed - Torque Characteristics (Reference values)
How to Read Speed- Torque Characteristics Diagram
Dimensions
Motor
Control Circuit
Other Specifications
Common Specifications of the Circuit Section
| Item | Specifications |
|---|---|
| Power Supply Input | Single phase 100/110/115 VAC ± 10 % 50/60 Hz Single phase 200/220/230 VAC ± 10 % 50/60 Hz |
| Control Power Supply | 24 VDC±10 %, 100 mA min. |
| Torque Setting Method |
|
| Input Signals | Photocoupler Input: Input resistance of 4.7 kΩ CW input, CCW input, INT/EXT switching input, alarm reset input |
| Output Signals | Open-collector output 4.5~26.4 VDC max. 40 mA max. Alarm Output |
| Protective Function | Under the following circumstances, the motor will stop, the alarm LED will blink, and an alarm signal will be output.
|
| Maximum Extension Distance | Between motor and power controller 20 m |
General Specifications
| Item | Motor Part | Power Controller Part | |
|---|---|---|---|
| Insulation Resistance | After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger. | After continuous operation at normal ambient temperature and humidity, the measurement value between the main circuit terminal and the control circuit terminal or the main circuit terminal and the case is 100 MΩ min. using a 500 VDC megger. | |
| Dielectric Strength | No abnormality is observed even with an application of 1.5 kVAC at 50 Hz between the coils and the case for 1 minute after rated operation at normal ambient temperature and humidity. | No abnormality is observed even with an application of 3.0 kVAC at 50 Hz or 60 Hz between the main circuit terminal and the control circuit terminal or the main circuit terminal and the case for 1 minute after continuous operation at normal ambient temperature and humidity. | |
| Temperature Rise | After a gearhead or equivalent heat sink * is connected for rated operation at normal ambient temperature and humidity, the measurement value of the winding temperature rise is 80 °C max. (when single-phase 100 VAC or single-phase 200 VAC) using the resistance change method. The value is 90 °C max. for others. | - | |
| Overheat Protective Device | Built-in Thermal Protector (Automatic Return Type) Open: 130±5 ℃, Reset: 85±20 ℃ |
- | |
| Operating Environment | Ambient Temperature | Single-Phase 100 VAC, Single-Phase 200 VAC: -10~+50 °C (Non-freezing) Other Voltages: -10 to +40 °C (Non-freezing) |
0~+50 °C (Non-freezing) |
| Ambient Humidity | 85 % max. (Non-condensing) | ||
| Thermal Class | 130 (B) | - | |
| Degree of Protection | IP20 | IP20 | |
- *Heat sink size (Material: Aluminum)
| Output Power | Size (mm) | Thickness (mm) |
|---|---|---|
| 3 W | 115 x 115 | 5 |
| 6 W | 125 x 125 | |
| 10 W | 135 x 135 | |
| 20 W | 165 x 165 |
Note
-
Do not do insulation resistance measurement or perform pressure tests with a connection between the motor and power controller.
Permissible Radial Load and Permissible Axial Load of Round Shaft Type
Permissible Radial Load
| Motor | Permissible Radial Load N | ||
|---|---|---|---|
| Frame Size □ (mm) | Output Shaft Diameter φ (mm) | From Shaft End 10 mm |
From Shaft End 20 mm |
| 42 | 5 | 40 | - |
| 60 | 6 | 50 | 110 |
| 70 | 6 | 40 | 60 |
| 80 | 8 | 90 | 140 |
| 90 | 10 | 140 | 200 |
| 12 | 240 | 270 | |
Permissible Axial Load
Avoid axial load as much as possible. If an axial load is unavoidable, keep it at half or less of the motor mass.
Standards
Regulations and Standards Materials
Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)
Explanations of the Global Laws, Regulations and Standards can be found here.
Information about our compliance with safety standards for each of our product models can be found here.
Hazardous Substances
The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).
For more information about compliance with regulations on chemical substances in Oriental Motor's Products, click here.
System Configuration
Cables and Accessories
close