Rack-and-Pinion System L Series αSTEP AZ Series Equipped

LM4B20AZMK-3

LM4B20AZMK-3

Rack and Pinion Motor

Product Classification Product Name List Price Shipping Date
Rack and Pinion Motor LM4B20AZMK-3 1,014.00 € Up to 5 pcs Estimated Ship 5weeks
• This product is an actuator only. A combination of driver circuit and connection cable is required for driving.
• Specifications and various data of combination products may be shown on the combination product page. Please check the page of the combination product.
Notice: The shipping date refers to the time of dispatch from the warehouse in Düsseldorf/Germany. Shipments with 30 pieces or more will require air freight.

Included

  • Rack and Pinion Motor: None

Specifications

Characteristics

Positioning Distance - Positioning Time
Positioning Distance - Positioning Time

Positioning Distance - Positioning Time

Operating - Transportable Mass
Operating - Transportable Mass

Operating - Transportable Mass

Dimensions

Rack and Pinion Motor
Rack and Pinion Motor

Rack and Pinion Motor

Rack and Pinion Motor (When Photomicrosensor is Installed)
Rack and Pinion Motor (When Photomicrosensor is Installed)

Rack and Pinion Motor (When Photomicrosensor is Installed)

Data Download

Other Specifications

General Specifications

Rack and Pinion Motor Driver
Thermal Class 130(B)
[Certified at 105 (A) when UL/CSA Standards are obtained]
Operating Environment Ambient Temperature 0~+40 °C (Non-freezing)*1 0~+50 °C (Non-freezing)
Ambient Humidity 85 % max. (Non-condensing)
Atmosphere No corrosive gases or dust. No exposure to water, oil or other liquids.
Degree of Protection IP30 (Excluding rack moving parts and connectors) IP10
IP20 for AZD-KED2, AZD-KEP2 and AZD-KPN2
Multi-Rotation Detection Range in Power OFF State(Motor output shaft) ± 900 revolutions (1800 revolutions)
*1
According to Oriental Motor’s measurement conditions

Repetitive Positioning Accuracy (Reference value)

This is the actual measurement value with the transportable mass. Varies depending on the load, driving conditions, and mounting direction.

Product Name Rack Moving Direction Repetitive Positioning Accuracy [mm]
LM2 Parallel ±0.25
LM4
LM2 Vertical ±0.07
LM4

Electromagnetic Brake Specifications

Product Name LM2 LM4
Type Power off activated type
Power Supply Voltage 24 V DC ± 5 %*
Power Supply Current [A] 0.25
Time Rating Continuous
  • *For the type with an electromagnetic brake, a 24 V DC ± 4 % specification applies if the wiring distance between the motor and driver is extended to 20 m using a cable.

Travel Direction

When shipped, the rack moving direction is set as follows.

B Type F Type

Rack Permissible Rotational Torque (Moment)

Product Name Rack Permissible Rotational Torque
(Moment)
LM2 0.3 N·m max.
LM4 0.5 N·m max.
  • Be sure to keep rotational torque below the permissible value.
    If too much rotational torque is applied, the abrasion of rack bushings will be sped up.
Rotational Torque (Moment)

Permissible Radial Load

Unit: N

Stroke
mm
LM2□50 LM2□200 LM4□20 LM4□150
100 25 25*1 120 60*1
200 20 20*1 90 40*1
300 10 10*1 70 30*1
400 10 10*1 60 25*1
500 7 7*1 50 20*1
600 40 15*1
1000 - - 15 *2
  • EitherF (vertical to the mounting foot surface) or B (horizontal to the mounting foot surface) indicating the rack moving direction is specified where the box □ is located in the product name.
*1
Values are for operating speeds up to 90 mm/s. When operating at speeds exceeding 90 mm/s, provide guides or other devices to prevent radial loads from being applied to the rack.
*2
To prevent damage to the rack, provide a guide or other means to prevent radial load from being applied.
Radial Load

Standards

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with regulations and standards for each of our product series can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

For more information about compliance with regulations on chemical substances in Oriental Motor's Products, click here.

Cables and Accessories

close
close
close
close
close
close