Reversible Motors KII Series (New standard)
5RK90JA-150
Combi geared motor
This product is currently no longer available for sale.
| Product Classification | Product Name | List Price | Shipping Date |
|---|---|---|---|
| Combi geared motor | 5RK90JA-150 | - | Discontinued Product (31.3.2024 discontinued) |
Included
- Motor, Gearhead, Capacitor, Capacitor Cap, Installation Screws, Parallel Key, Operating Manual
Specifications
Dimensions
Data Download
Other Specifications
General Specifications
| Item | Specifications |
|---|---|
| Insulation Resistance | 100 MΩ or more when a 500 VDC megger is applied between the windings and the case after 30 minutes continuous operation under normal ambient temperature and humidity. |
| Dielectric Strength | Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the motor windings and the case for 1 minute after 30 minutes continuous operation under normal ambient temperature and humidity. |
| Temperature Rise | After 30 minutes of continuous operation at normal ambient temperature and humidity with the gearhead or equivalent heat sink* connected to the motor, the winding temperature rise value measured using the resistance change method will be 80 °C max. |
| Thermal Class | 130 (B) |
| Overheat Protective Device | The 6 W type is impedance protected Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 85 ± 20 °C |
| Operating Ambient Temperature | Single-Phase 100 VAC, Single-Phase 200 VAC: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing) For gearhead gear ratios 2 or 3 the lower temperature limit is 0 °C. |
| Operating Ambient Humidity | 85 % max. (Non-condensing) |
| Degree of Protection |
Terminal box type:
IP40 (25 W, 40 W)
IP20 (60 W, 90 W) Lead wire type:
IP20
|
- * Heat Sink Size (Material: Aluminum)
| Motor Type (Output power) | Size (mm) | Thickness (mm) |
|---|---|---|
| 6 W Type | 115 x 115 | 5 |
| 15 W Type | 125 x 125 | |
| 25 W Type | 135 x 135 | |
| 40 W Type | 165 x 165 | |
| 60 W, 90 W Type | 200 x 200 |
Permissible Radial Load and Permissible Axial Load of Gearhead
| Product Name | Gear Ratio | Maximum Permissible Torque N·m |
Permissible Radial Load N | Permissible Axial Load N |
|
|---|---|---|---|---|---|
| Distance from the End of the Gearhead Output Shaft | |||||
| 10 mm | 20 mm | ||||
| 2GV□ 2GV□B |
2 | 6 | 100 | 150 | 15 |
| 3 | 100 | 150 | 30 | ||
| 5~25 | 150 | 200 | 40 | ||
| 30~360 | 200 | 300 | |||
| 2GV□B | 500~3600 | 200 | 300 | ||
| 3GV□ 3GV□B |
2 | 10 | 150 | 250 | 20 |
| 3 | 150 | 250 | 40 | ||
| 5~25 | 200 | 300 | 80 | ||
| 30~360 |
300 |
400 | |||
| 3GV□B | 500~3600 | 300 | 400 | ||
| 4GV□ 4GV□B |
2 | 16 | 300 | 350 | 25 |
| 3 | 300 | 350 | 50 | ||
| 5~25 | 300 | 350 | 100 | ||
| 30~360 | 450 | 550 | |||
| 4GV□B | 500~3600 | 450 | 550 | ||
| 5GV□ 5GV□B 5GVH□ 5GVH□B 5GVH□BS 5GVH□BSF |
2 | 30 | 250 | 350 | 100 |
| 3~9 | 400 | 500 | 150 | ||
| 12.5~18 | 450 | 600 | |||
| 25~300 | 500 | 700 | |||
| 5GV□B | 360~3000 | 500 | 700 | ||
| 5GVR□ 5GVR□B |
2 | 40 | 250 | 350 | 100 |
| 3~9 | 400 | 500 | 150 | ||
| 12.5~18 | 450 | 600 | |||
| 25~180 | 500 | 700 | |||
| 7GV□B | 5~20 | 70 | 700 | 850 | 200 |
| 30~100 | 1400 | 1700 | 400 | ||
System Configuration

Cables and Accessories
close
close